Boring Tools Cutting Data Tables

DV/BT50, HSK-A100 Capto C8

Light weight tools serie 318, rough boring Light weight tools serie 318, EWN/EWE 200

Ø 340-410/480 Ø 340-410/480/530

Picture 3

Picture 4

Ø 90

Ø 90

DVS

Rough boring Serie 318

Fine boring EWN/EWE 200

Inserts

Vc

RSS

DVS

Inserts

Vc

Allow.

Feed

Workpiece material

Boring depth

Allow. fn Ra 1.6 µm X [mm] Order No. R m/min mm/Ø mm/U mm/Ø mm/U Order No. R m/min mm/Ø mm/Ø mm/U Allow. Feed Std. val. Max.

GGG

160 260 320 370 420 470 520 160 260 320 370 420 470 520 160 260 320 370 420 470 520 160 260 320 370 420 470 520 160 260 320 370 420 470 520 160 260 320 370 420 470

654.991 0.8 230 16.0 0.55 23.0 654.991 0.8 230 15.0 0.55 23.0 654.989 0.4 230 14.0 0.35 22.0 654.989 0.4 180 14.0 0.35 22.0 654.989 0.4 120 12.0 0.35 20.0 654.989 0.4 60 12.0 0.35 18.0 654.989 0.4 40 12.0 0.35 18.0 654.965 0.8 210 11.0 0.55 18.0 654.964 0.4 210 10.0 0.35 17.0

0.25 655.390 0.8 350 0.25 655.390 0.8 350 0.15 655.380 0.4 250 0.15 655.380 0.4 160 0.15 655.370 0.2 120 0.15 655.370 0.2 60 0.15 655.370 0.2 40 0.25 655.320 0.8 320 0.15 655.320 0.8 320 0.15 655.318 0.4 240 0.15 655.318 0.4 160 0.15 655.319 0.2 120 0.15 655.319 0.2 60 0.15 655.319 0.2 40 0.25 655.398 0.8 1200 0.25 655.398 0.8 750 0.25 655.398 0.8 400 0.15 655.388 0.4 300 0.15 655.388 0.4 180 0.15 655.378 0.2 100 0.15 655.378 0.2 70 0.25 655.320 0.8 650 0.25 655.320 0.8 650 0.15 655.318 0.4 400 0.15 655.318 0.4 300 0.15 655.319 0.2 180 0.15 655.319 0.2 100 0.15 655.319 0.2 70 0.25 655.320 0.8 120 0.15 655.320 0.8 120 0.15 655.318 0.4 100 0.15 655.318 0.4 80 0.15 655.319 0.2 70 0.15 655.319 0.2 60 0.15 655.319 0.2 40 0.2 655.326 0.4 50 0.15 655.326 0.4 50 0.15 655.326 0.4 40 0.15 655.316 0.2 30 0.15 655.316 0.2 30 0.15 655.316 0.2 30

0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.1 0.1 0.1

2.5 2.5 2.5 2.0 1.5 1.0 1.0 2.0 2.0 2.0 1.5 1.0 0.8 0.8 2.5 2.5 2.5 2.5 2.0 1.5 1.5 2.5 2.5 2.5 2.5 2.0 1.5 1.5 2.5 2.5 2.5 2.0 1.5 1.0 1.0 1.5 1.5 1.5 1.0 0.8 0.6

0.14 0.14 0.10 0.10 0.06 0.06 0.06 0.14 0.14 0.10 0.10 0.06 0.06 0.06 0.14 0.14 0.14 0.10 0.10 0.06 0.06 0.14 0.14 0.10 0.10 0.06 0.06 0.06 0.14 0.14 0.10 0.10 0.06 0.06 0.06 0.10 0.10 0.10 0.06 0.06 0.06

< 500 N/mm2

GGG 40 GGG 50

K

GGG

< 800 N/mm2

GGG 60 GGG 70 GGG 80

654.964 0.4 210 654.964 0.4 180 654.964 0.4 120 654.964 0.4 60 654.964 0.4 40

9.0 0.35 15.0 9.0 0.35 15.0 8.0 0.35 14.0 8.0 0.35 12.0 8.0 0.35 12.0

Aluminium

654.992 0.8 900 16.0 0.55 23.0 654.992 0.8 750 15.0 0.55 22.0 654.992 0.8 400 15.0 0.55 22.0 654.995 0.4 300 14.0 0.35 20.0 654.995 0.4 180 14.0 0.35 20.0 654.995 0.4 100 12.0 0.35 18.0 654.995 0.4 70 10.0 0.35 16.0 654.979 0.8 650 16.0 0.55 23.0 654.979 0.8 650 15.0 0.55 22.0 654.978 0.4 400 15.0 0.35 22.0 654.978 0.4 300 14.0 0.35 20.0 654.978 0.4 180 14.0 0.35 20.0 654.978 0.4 100 12.0 0.35 18.0 654.978 0.4 70 10.0 0.35 16.0 654.969 0.8 120 11.0 0.55 18.0 654.968 0.4 120 10.0 0.35 17.0

Wrought alloys

Si < 10%

3.1354 3.2315 3.3545

N 3.4365

Aluminium Cast alloys Si > 10% G-AlSi 12

G-AlSi17Cu4Mg

Titanium

3.7164

654.968 0.4 120 654.968 0.4 100 654.968 0.4 80 654.968 0.4 60 654.968 0.4 60 654.969 0.8 50 654.968 0.4 50 654.968 0.4 40 654.968 0.4 40 654.968 0.4 30 654.968 0.4 30

9.0 0.35 15.0 9.0 0.35 15.0 8.0 0.35 14.0 8.0 0.35 12.0 8.0 0.35 12.0 9.0 0.40 14.0 8.0 0.25 12.0 8.0 0.25 12.0 8.0 0.25 10.0 6.0 0.25 8.0 6.0 0.25 8.0

S

Ni-basic-, Co-basic-,

Alloys

DVS rough boring For double offset rough boring “DVS“ a longer insert holder 637.951 / CC12 or 637.953 / CC16 has to be mounted on one side of the tool assembly. The longer insert holders are coloured black.

Extension slides: Ø 340 - 410 mm (picture 1+2), extension slides 318.224 / Ø 410 - 480 mm (picture 3+4), extension slide 318.225

Extension of the boring range for fine boring with additional insert holders: With insert holder size 2, 626.272 the boring range can be extended by 25 mm/Ø, and with insert holder size 3, 626.273 by 50 mm/Ø.

59

Powered by