Boring Tools Cutting Data Tables

DV/BT40, HSK-A63 Capto C6

Light weight tools serie 318, rough boring Light weight tools serie 318, EWN/EWE 200

Ø 270-340 Ø 270-340/365/390

Ø 63.5

Ø 63.5

DVS

Rough boring Serie 318

Fine boring EWN/EWE 200

Inserts

Vc

RSS

DVS

Inserts

Vc

Allow.

Feed

Workpiece material

Boring depth

Allow. fn Ra 1.6 µm X [mm] Order No. R m/min mm/Ø mm/U mm/Ø mm/U Order No. R m/min mm/Ø mm/Ø mm/U Allow. Feed Std. val. Max.

GGG

115 135 175 195 215 235 255 115 135 175 195 215 235 255 115 135 175 195 215 235 255 115 135 175 195 215 235 255 115 135 175 195 215 235 255 115 135 175 195 215 235 255

654.991 0.8 220 12.00 0.55 18.00 654.991 0.8 220 12.00 0.55 18.00 654.991 0.8 200 10.00 0.55 16.00 654.989 0.4 180 9.00 0.35 14.00 654.989 0.4 140 8.00 0.35 12.00 654.989 0.4 80 6.00 0.35 9.00 654.989 0.4 60 6.00 0.35 9.00 654.965 0.8 200 9.00 0.50 15.00 654.965 0.8 200 9.00 0.50 15.00 654.965 0.8 180 8.00 0.50 13.00 654.964 0.4 160 7.00 0.30 11.00 654.964 0.4 130 6.00 0.30 9.00 654.964 0.4 70 5.00 0.30 8.00 654.964 0.4 60 5.00 0.30 8.00 654.992 0.8 550 10.00 0.55 16.00 654.992 0.8 550 10.00 0.55 16.00 654.992 0.8 400 9.00 0.55 14.00 654.995 0.4 350 8.00 0.35 12.00 654.995 0.4 220 7.00 0.35 11.00 654.995 0.4 120 6.00 0.35 10.00 654.995 0.4 80 6.00 0.35 10.00 654.979 0.8 550 10.00 0.55 16.00 654.979 0.8 550 10.00 0.55 16.00 654.979 0.8 400 9.00 0.55 14.00 654.978 0.4 350 8.00 0.35 12.00 654.978 0.4 220 7.00 0.35 11.00 654.978 0.4 120 6.00 0.35 10.00 654.978 0.4 80 6.00 0.35 10.00 654.969 0.8 120 8.00 0.50 13.00 654.969 0.8 120 8.00 0.50 13.00 654.969 0.8 120 8.00 0.50 13.00 654.968 0.4 100 6.00 0.30 11.00 654.968 0.4 80 5.00 0.30 8.00 654.968 0.4 60 5.00 0.30 8.00 654.968 0.4 60 5.00 0.30 8.00 654.969 0.8 50 6.00 0.40 10.00 654.969 0.8 50 6.00 0.40 10.00 654.968 0.4 40 5.00 0.25 8.00 654.968 0.4 40 4.00 0.25 6.00 654.968 0.4 30 4.00 0.25 6.00 654.968 0.4 30 4.00 0.25 6.00

0.30 655.390 0.8 350 0.30 655.390 0.8 350 0.30 655.390 0.8 300 0.20 655.380 0.4 250 0.20 655.380 0.4 140 0.20 655.370 0.2 80 0.20 655.370 0.2 60 0.25 655.320 0.8 320 0.25 655.320 0.8 320 0.25 655.318 0.4 300 0.15 655.318 0.4 240 0.15 655.319 0.2 140 0.15 655.319 0.2 70 0.15 655.319 0.2 50 0.30 655.398 0.8 1200 0.30 655.398 0.8 1200 0.30 655.398 0.8 750 0.20 655.388 0.4 400 0.20 655.388 0.4 240 0.20 655.378 0.2 120 0.20 655.378 0.2 100 0.30 655.320 0.8 650 0.30 655.320 0.8 650 0.30 655.320 0.8 650 0.20 655.318 0.4 400 0.20 655.318 0.4 240 0.20 655.319 0.2 120 0.20 655.319 0.2 100 0.25 655.320 0.8 120 0.25 655.320 0.8 120 0.25 655.318 0.4 100 0.15 655.318 0.4 80 0.15 655.318 0.4 70 0.15 655.319 0.2 60 0.15 655.319 0.2 60 0.20 655.326 0.4 50 0.20 655.326 0.4 50 0.12 655.326 0.4 40 0.12 655.316 0.2 30 0.12 655.316 0.2 30 0.12 655.316 0.2 30

0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.1 0.1 0.1 0.1

2.5 2.5 2.5 2.0 1.5 1.0 1.0 2.0 2.0 2.0 1.5 1.0 0.8 0.8 2.5 2.5 2.5 2.5 2.0 1.5 1.5 2.5 2.5 2.5 2.5 2.0 1.5 1.5 2.5 2.5 2.5 2.0 1.5 1.0 1.0 1.5 1.5 1.5 1.0 0.8 0.6 0.6

0.14 0.14 0.14 0.10 0.10 0.06 0.06 0.14 0.14 0.10 0.10 0.06 0.06 0.06 0.14 0.14 0.14 0.10 0.10 0.06 0.06 0.14 0.14 0.14 0.10 0.10 0.06 0.06 0.14 0.14 0.10 0.10 0.10 0.06 0.06 0.10 0.10 0.10 0.06 0.06 0.06 0.06

< 500 N/mm2

GGG 40 GGG 50

K

GGG

< 800 N/mm2

GGG 60 GGG 70 GGG 80

Aluminium

Wrought alloys

Si < 10%

3.1354 3.2315 3.3545

N 3.4365

Aluminium Cast alloys Si > 10% G-AlSi 12

G-AlSi17Cu4Mg

Titanium

3.7164

S

Ni-basic-, Co-basic-,

Alloys

655.316 0.2 30

DVS rough boring For double offset rough boring “DVS“ a longer insert holder 637.951 / CC12 or 637.953 / CC16 has to be mounted on one side of the tool assem- bly. The longer insert holders are coloured black.

Extension of the boring range with additional insert holders: • Fine Boring: Insert holder size 2, 626.272, for the range Ø 340 - 365 mm, insert holder size 3, 626.273, for the range Ø 365 - 390 mm

35

Powered by