TURNING TOOLS
Revolutionary The first modular tooling system for turning applications on MTCs (Mill-Turn Centers). A modular tooling system offers better efficiency, material selection, heat treatment and optimal tool lengths. Serious damage to tool holders caused by broken inserts can now be easily and economically replaced.
COOLANT
THROUGH
DUAL CONTACT 45º TILT STYLE TYPE S FOR MTC
DUAL CONTACT 90º RIGHT ANGLE STYLE TYPE F FOR MTC
Very Precise Locating Pilot
Locking Screw 2x
Orientation Pin
Face Clampin
90º
Face-To-Face Clamping
45º
Clamp Bolts
Secure and Rigid Clamping Type S Cartridges are located in the basic holder by means of a precision ground pilot and secured by two opposing radial screws with a 15º taper. With a slight offset to locating sockets, high face-to-face clamping force of the two components is generated. To maintain precise locations and orientation, an additional locating pin is included for positive transfer of cutting torque. R
Simple and Positive Clamping Type F uses two clamping bolts that press the cartridge onto the basic holder. The torque is transmitted by an interlocking drive slot.
Face Clamping
Clamp Bolts
Safe and Easy Clamping of Inserts The double-clamping system simultaneously pushes an insert downward and draws it into the contact faces to achieve secure and rigid clamping.
R
S P I N D L E S Y S T E M DUAL CONTACT
S P I N D L E S Y S T E M DUAL CONTACT
Clamp Screw
Clamp Piece
Insert
Spring
Carbide Shim
BCV40/50 BBT40/50
C5/C6/C8
HSK-T63/100
Shim Screw
BCV40/50 BBT40/50
C5/C6/C8
HSK-T63/100
17 Cartridges for 45º Tilt Style Type S
36 Cartridges for 90º Right Angle Style Type F
Right hand, left hand and neutral cartridges available, as well as integral models. Also part of the MTC turning tool program are square tool holders and boring bar holders.
Right hand and left hand cartridges available. Also part of the MTC turning tool program are square tool holders and boring bar holders.
14
Powered by FlippingBook