STAND ALONE VISION BASED ACCESSORIES
TOOL ID CHIP While allowing for the reading & writing of tools equipped with an ID chip, tools can be automatically recognized and the measured data can be automatically written. This software allows for the reading of the code field from the chip in order to automatically select the tool from the system database. After the measurement/presetting of the cutting edge(s), it also allows for the writing of the actual measured data and possible nominal tool life information, as well as other data present within the Speroni. An off-line feature allows for the complete reading and writing of the chips by typing the desired values from your keyboard. These values will automatically be checked for congruence.
Catalog Number
Description
32.220.083 32.220.084 32.220.085 32.220.087
Mechanical Slide for Read/Write Head - Automatic
Bar Code Reader - Uniscan C2R
Read/Write Balluff Hardware & Software Model BIS C - 650 Tool Identification Balluffs - Handle For Read/ Write Head
• P&F, Mazak and other systems available Requires EDGE 2.0 Control Software. ! CAUTION
CNC CONTROL UNIT Electronic micrometric movements allow for accurate and repetitive positioning of the X & Z axes. The positioning certainty of these two linear axis is 1 micron or .000039". This feature, together with the optional automatic CNC spindle movement, makes the measurement and inspection of the tool assembly completely operator independent. The mastering and recalibration of the system is a simple one step operation, which can be carried out on any of the Speroni original adapters stored in the database.
GUARANTEED +/- .002mm
Micrometric hand-wheel, joystick and independent axes selection integrated in the control’s cockpit for maximum ease of use and ergonomics.
30
Powered by FlippingBook