BIG KAISER Measuring Instruments 2018-2019

BENCH TOP VISION BASED ACCESSORIES

4 POSITION INDEX SYSTEM The 90º spindle indexing system enables you to fix in four precise positions.

AUTOMATIC MECHANICAL CLAMPING SYSTEM The proprietary design of this automatic system allows for a high repeatability and accuracy in the measurement of the tool. All of this is achieved without adding or removing any component on the machine. Guarantees correct unclamp and immediate release of the taper.

MAXIMUM CLAMPING TIME 3 SEC.

Catalog Number

Description

32.105.200

4 Position Index System

HSK

VDI

CAPTO

KM

ISO

BT

REDUCTION ADAPTERS Automatic Integrated Clamping

This adapter will simultaneously clamp to the tool as it is clamped to the spindle. The adapter has an integrated calibration notch with calibration values etched onto the side plate.

Catalog Number

Description

32.310.100 32.310.101 32.310.102 32.310.103 32.310.110 32.310.111 32.310.112 32.310.114 32.310.116 32.310.119 32.310.120 32.310.121 32.310.122

ISO50/ ISO40SperoniOriginalReductionAdapter-A.I.C. ISO50/ ISO30SperoniOriginalReductionAdapter-A.I.C. ISO50/ ISO45SperoniOriginalReductionAdapter-A.I.C. ISO40/ ISO30SperoniOriginalReductionAdapter-A.I.C. ISO50/HSK-40A/CSperoniOriginalReductionAdapter-A.I.C ISO50/HSK-50A/CSperoniOriginalReductionAdapter-A.I.C ISO50/HSK-63A/CSperoniOriginalReductionAdapter-A.I.C. ISO50/HSK-80A/CSperoniOriginalReductionAdapter-A.I.C. ISO50/HSK-80FMSperoniOriginalReductionAdapter-A.I.C. ISO50/C3SperoniOriginalReductionAdapter-A.I.C ISO50/C4SperoniOriginalReductionAdapter-A.I.C ISO50/C5SperoniOriginalReductionAdapter-A.I.C ISO50/C6SperoniOriginalReductionAdapter-A.I.C

Catalog Number

Description

32.105.202 32.105.203 32.105.204

MAGIS ISO50 Automatic Mechanical Clamping System MAGIS ISO40 Automatic Mechanical Clamping System MAGIS ISO30 Automatic Mechanical Clamping System

Catalog Number

Description

32.110.037 32.110.038 32.110.039 32.110.040 32.110.041

HSK-32A/C Integral Spindle w/ Automatic Clamping HSK-40A/C Integral Spindle w/ Automatic Clamping HSK-50A/C Integral Spindle w/ Automatic Clamping HSK-63A/C Integral Spindle w/ Automatic Clamping HSK-100A/C Integral Spindle w/ Automatic Clamping

TOOL ID CHIP While allowing for the reading & writing of tools equipped with an ID chip, tools can be automatically recognized and the measured data can be automatically written.

Catalog Number

Description

32.110.056 32.110.057 32.110.058 32.110.059 32.110.064

C3 Integral Spindle w/ Automatic Clamping C4 Integral Spindle w/ Automatic Clamping C5 Integral Spindle w/ Automatic Clamping C6 Integral Spindle w/ Automatic Clamping C8 Integral Spindle w/ Automatic Clamping

Catalog Number

Description

32.105.120 32.105.122

MAGISRead/WriteBalluffHardware&SoftwareModelBISC-650 MAGISTool IndentificationBalluffs-HandleForRead/WriteHead

These systems are guaranteed for the following standard knobs: DIN 69872, ISO 7388/2A, ISO 7388/2B, MAS 403 BT, MAS 403 BT ANSI Type, ANSI 5.50 CATERPILLAR, BT (JIS 6339). ! CAUTION

• P&F, Mazak and other systems available Requires EDGE 2.0 Control Software. ! CAUTION

22

Powered by