C-CENTERING CUTTER—3 INSERT
Hole Chamfering Chamfering
Immediate Evacuation of Chips with Coolant Supply By providing coolant holes, it is possible to cool the cutting edge and immediately discharge the chips.
• Wrench and screw are included; inserts tip is must be ordered separately • Centering is not possible
Insert Clamping Screw Set
• Inserts are available in packages of 10 pcs. • Please clarify the insert model and grade when ordering (ex: CN0906-ACZ150) • 10 screws and 1 wrench are included with Insert Clamping Screw Set • It is recommended to regularly replace clamping screws and wrench to ensure the correct clamping force is maintained
CENTERING MICRO CUTTING DATA
This table is a guideline for selecting cutting parameters. Because it depends on the state of machine and work, please adjust in a timely manner. During chamfering of cross feed, dry cutting (including air blow) is recommended. However, when severe welding occurs on the cutting edge such as aluminum processing, please use water-soluble cutting oil.
Cutting Speed Vc (m/min)
Feed per Tooth fz (mm/flute)
Unalloyed Steel, Carbon Steel, Alloy Steel
50-150 50-120 70-200 100-300
Cast Iron/Ductile Cast Iron Aluminum/Non-ferrous
Powered by FlippingBook