COLLET & MILLING CHUCKS BIG CAPTO TOOLING, C4
MEGA E CHUCK CLAMPING RANGE: ø.125"-.500" (ø3-12mm) Exclusively for High Speed Finish End Milling
MAX 35,000 RPM
COOLANT
THROUGH
L 1 H Max L
H
Catalog Number
H Max
Weight (lbs.)
ød
øD øD 1
L
L 1
H
Collet
Nut
Wrench Max RPM
.125-.250 (3-6mm) .125-.250 (3-8mm) .125-.375 (3-10mm) .125-.500 (3-12mm)
.9
.984
1.02
1.97
.98
1.73
1.73 MEC6-
MEN6 MGR25 35,000
C4-MEGA6E-50
1.181
1.22
1.97
1.10
1.73
1.73 MEC8-
MEN8 MGR30 35,000
1.1
-MEGA8E-50
1.378
1.46
2.17
1.34
1.93
1.93 MEC10-
MEN10 MGR35 30,000
1.1
-MEGA10E-55
1.654
— 2.36
— 1.97
1.97 MEC13-
MEN13 MGR42 25,000
1.3
-MEGA13E-60
• MEGA E NUT is included; collet, wrench and adjusting screw must be ordered separately • Weight includes nut but not collet • Center-through coolant supply is available • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance; when using, slowly ramp up to the appropriate speed starting from slow speeds
• “H” indicates the adjustment length with an adjusting screw • Adjusting screws cannot be used with models marked
MEGA DOUBLE POWER CHUCK CLAMPING RANGE: ø16-20mm For Heavy Duty End Milling
COOLANT
MAX 30,000 RPM
THROUGH
L
L 1
E
H Max
Catalog Number
Min Clamping Length E
Weight (lbs.)
L
L 1
H
ød
øD
øD 1
Wrench
16mm 20mm
C4-MEGA16D-70 -MEGA20D-65
1.811 1.969
1.850 2.008
2.756 2.559
— 2.520 — 2.323
1.969 2.008
MGR46L MGR50L
1.8 1.8
• Wrench must be ordered separately • Jet-through type provides coolant form the chuck nose, thus tools with oil holes cannot be used
11
Powered by FlippingBook