SYSTEM 40 PALLETS
Mono Pallet Pallet is shown with a ø12mm timing pin for use with MCM 150, MSM 170, ISM 160 and DC 200 chucks. The model ESM 138 chuck accepts a 14mm key or pin. The ESM 176 chuck accepts a 25mm key or pin.
Can be Configured for the Following Chucks: • ESM/EFM/ERGO 138 • MLM/MCM 150 • ISM 160 • MSM 170
• ESM 176 Turbo • DLM/DCM 200
Duo & Quad Pallet Duo and Quad pallets with load on the model QC 400 or any set of chucks on 200mm spacing.
Can be Configured for the Following Chucks: • DLM 200 • DCM 200 • QC 400 • ERGO Base Stations
While loading and unloading work into the fixture, the holes in the bottom of the pallet mate to setup plates that stabilize the pallet for safe operation outside of a Unilock chuck.
Pallet Type Mono Mono Mono Mono
Pallet Name AP 200 SP 200
Catalog Number
Weight (lbs)
Length w/ Handles
Timing Pin T
Pin Dia. øP
Material
Thickness Length Width
15.260.640 15.260.540 15.260.647 15.260.645 15.270.640 15.270.540 15.270.644
Aluminum 6.6
25mm 199mm 199mm 266mm 81mm 12mm 20mm 199mm 199mm 266mm 81mm 12mm 25mm 199mm 199mm 266mm 61mm 14mm 25mm 199mm 199mm 266mm 76mm 25mm
Steel
15.4
AP 200-138 AP 200-176
Aluminum 6.6 Aluminum 6.6 Aluminum 13.2
Duo Duo
AP 400 SP 400
25mm 399mm 199mm 470mm 20mm 399mm 199mm 470mm 25mm 399mm 399mm 470mm
— — —
— — —
Steel
30.8
Quad
AP 400 x 400
Aluminum 26.4
Pallet Stand Used to stabilize a pallet while it is being worked on outside of the machine.
Stand Type
Catalog Number
15.260.800
Mono
Duo
15.270.800
Quad
70
Powered by FlippingBook