20,000 RPM
28,000 RPM
25,00 RPM
MAX 32,000 RPM
MAX 30,000 RPM
COLLET CHUCKS
MEGA E CHUCK CLAMPING RANGE: Ø.125"-.500" (Ø3-12mm) Exclusively for High Speed Finish End Milling
COOLANT MAX 33,000 RPM THROUGH MAX 45,000 RPM
MAX 38,00 RPM
MAX 35,000 RPM
MAX 40,000 RPM
L
L 1
H
MAX 50,000 RPM
MAX 60,000 RPM
BCV No.
MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM Wrench
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Max RPM
Weight (lbs.)
Ød
ØD
ØD 1
L
L 1
H
Collet
Nut
BCV40-MEGA6E-3 BCV40-MEGA6E-4 BCV40-MEGA6E-5 BCV40-MEGA6E-6 BCV40-MEGA8E-3 BCV40-MEGA8E-4 BCV40-MEGA8E-5 BCV40-MEGA8E-6 BCV40-MEGA10E-3 BCV40-MEGA10E-4 BCV40-MEGA10E-5 BCV40-MEGA10E-6 BCV40-MEGA10E-8 BCV40-MEGA13E-3 BCV40-MEGA13E-4 BCV40-MEGA13E-5 BCV40-MEGA13E-6 BCV40-MEGA13E-8 BCV50-MEGA13E-4 BCV50-MEGA13E-5 BCV50-MEGA13E-6 BCV50-MEGA13E-8
1.09 1.25 1.45 1.50 1.28 1.46 1.55 1.69 1.48 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.90 2.07 2.25 2.42
3.00 4.00 5.00 6.00 3.00 4.00 5.00 6.00 3.00 4.00 5.00 6.00 8.00 3.00 4.00 5.00 6.00 8.00 4.00 5.00 6.00 8.00
1.50 2.42 3.54 4.54 1.50 2.54 3.58 4.58 1.54 2.58 3.58 4.58 6.62 1.62 2.62 3.62 4.62 6.62 2.42 3.42 4.42 6.50
35,000 29,000 29,000 20,000 30,000 29,000 29,000 20,000 30,000 29,000 29,000 22,000 16,000 30,000 29,000 29,000 22,000 16,000 18,000 18,000 16,000 12,000
2.5 3.0 3.4 3.8 2.8 3.2 3.6 4.3 2.9 3.4
.125-.250 (3-6mm)
.984
1.45-1.77 MEC6- o
MEN6 MGR25
.125-.250 (3-8mm)
1.181
1.65-2.00 MEC8- o
MEN8 MGR30
.125-.375 (3-10mm)
MAX 8,000 RPM MAX 4,000 RPM 3.9 4.5 5.2 3.2 3.8 4.3
1.378
1.89-2.28 MEC10- o
MEN10 MGR35
MAX 2,000 RPM
.125-.500 (3-12mm)
1.654
1.96-2.36 MEC13- o
MEN13 MGR42
4.9 6.1 8.5 9.3
.125-.500 (3-12mm)
1.654
1.96-2.36 MEC13- o
MEN13 MGR42
10.6 12.8
• MEGA E NUT is included; collet, wrench and adjusting screw must be ordered separately • Weight includes nut but not collet • Center through coolant supply is available • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • “H” indicates the adjustment length with an adjusting screw
ACCESSORIES
COLLET PG. 380
MEGA NUT PG. 381
PERFECT SEAL PG. 381
MEGA WRENCH PG. 390
SCREW PG. 411
70
Powered by FlippingBook