10,000 RPM
12,000 RPM
14,000 RPM
MAX 16,000 RPM
MAX 17,000 RPM
COLLET CHUCKS
MEGA NEW BABY CHUCK CLAMPING RANGE: Ø.010"-1.000" For Drills, Reamers, Taps & Finishing End Mills
COOLANT MAX 28,000 RPM THROUGH MAX 32,000 RPM
MAX 25,00 RPM
MAX 20,000 RPM
L
MAX 30,000 RPM
L 1
H
MAX 33,000 RPM
MAX 38,00 RPM
MAX 35,000 RPM
BCV50
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Max RPM
MAX 45,000 RPM Weight (lbs.) 7.0
MAX 40,000 RPM
Ød
ØD
L
L 1
H
Collet
Nut
Wrench
BCV50-MEGA6N-3.5 BCV50-MEGA6N-5 BCV50-MEGA6N-6 BCV50-MEGA8N-3.5 BCV50-MEGA8N-5 BCV50-MEGA8N-6 BCV50-MEGA10N-3.5 BCV50-MEGA10N-5 BCV50-MEGA10N-6 BCV50-MEGA10N-8 BCV50-MEGA13N-3.5 BCV50-MEGA13N-5 BCV50-MEGA13N-6 BCV50-MEGA13N-8 BCV50-MEGA16N-3.5 BCV50-MEGA16N-5 BCV50-MEGA16N-6 BCV50-MEGA16N-8 BCV50-MEGA20N-3.5 BCV50-MEGA20N-5 BCV50-MEGA20N-6 BCV50-MEGA20N-8 BCV50-MEGA25N-4 BCV50-MEGA25N-6
3.50 5.00 6.00 3.50 5.00 6.00 3.50 5.00 6.00 8.00 3.50 5.00 6.00 8.00 3.50 5.00 6.00 8.00 3.50 5.00 6.00 8.00 4.00 6.00
1.72 3.03 4.03 1.72 3.03 4.03 1.72 3.03 4.03 6.03 1.72 3.22 4.03 6.03 1.72 3.22 4.22 6.22 1.80 3.22 4.22 6.22 2.50 4.50
20,000 20,000 15,000 20,000 20,000 15,000 20,000 20,000 15,000 12,000 18,000 18,000 16,000 12,000 17,000 17,000 16,000 13,000 16,000 16,000 15,000 13,000 15,000 13,000
.010-.236
.787
.91-1.69
MGN6
MGR20
7.1 7.3
NBC6- o
MAX 50,000 RPM
MAX 60,000 RPM 7.1 7.4
.020-.315
.984
1.02-1.77
MGN8
MGR25
NBC8- o
7.6 7.3 7.7 7.9 8.6 7.5 8.1 8.5 9.3 7.8 8.7 9.3
MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM
.059-.394
1.181
1.50-1.89 NBC10- o
MGN10
MGR30
.098-.512
1.378
1.73-2.48 NBC13- o
MGN13
MGR35
.098-.630
1.654
1.89-2.68 NBC16- o
MGN16
MGR42
10.4
8.1 9.0
.098-.787
1.811
2.01-2.68 NBC20- o
MGN20
MGR46
MAX 8,000 RPM MAX 4,000 RPM 10.9 9.7 11.0 8.8
.610-1.000
2.362
2.52-2.91 NBC25- o
MGN25
MGR60L
MAX 2,000 RPM
• MEGA NEW BABY NUT is included; collet, wrench and adjusting screw must be ordered separately • Weight includes nut but not collet • Center through coolant supply is available • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • “H” indicates the adjustment length with an adjusting screw
ACCESSORIES
MEGA WRENCH PG. 390
SCREW PG. 411
COLLET PG. 360
MEGA NUT PG. 366
PERFECT SEAL PG. 368
68
Powered by FlippingBook