MAX 16,000 RPM
MAX 17,000 RPM
HYDRAULIC CHUCK OVERVIEW
MAX 28,000 RPM
MAX 25,000 RPM
MAX 20,000 RPM
MAX 32,000 RPM
MAX 30,000 RPM
CLAMPING RANGE: Ø.125"-1.250" (Ø3-32mm) For high precision machining. Ideal tool holders for machining processes that require high accuracy such as drills, reamers, ball mills, end mills, diamond reamers and grinding tools. MAX 35,000 RPM MAX 33,000 RPM MAX 38,000 RPM
MAX 45,000 RPM
MAX 40,000 RPM
Touch Probe & Edge Finder Drilling
Tool Offset Sensor
MAX 50,000 RPM Tapping
MAX 60,000 RPM
Reaming
Reaming
Reaming
Tapping
Tappin
Drilling
Drilling
End Milling
End Milling
End Milling
Finish Milling
R
SPINDLE SYSTEM DUAL CONTACT
A WIDE VARIETY OF CLAMPING DIAMETERS & PROJECTIONS AVAILABLE
MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM Chamfering
Short Projection Length
Back Spot Facing Back Chamfering Face Milling Back Chamfering Face Milling
Tap Hole Chamfering
Back Chamfering Face Milling
Chamfer Chamfering
Chamfering
Chamfering
Chamfering
Dual Oil Pressure Points
RUNOUT ACCURACY LESS THAN .00012" High precision runout accuracy less than .00012" at 4xD improves the workpiece surface finish and extends tool life.
Back Chamfering
Back Chamfering
Back Chamfering
Chamfering INTERNAL STRUCTURE WITH INCREASED ACCURACY AND RIGIDITY The integrated structure of the body and clamp sleeve gives greater rigidity and achieves better accuracy compared to the traditional two-part
Chamfering HIGH RUNOUT ACCURACY <3μm
Chamfering
Chamfering
Chamfering
4xD
MAX 8,000 RPM
Shoulder Milling construction sealed with O-rings. 2-point tightening with dual hydraulic chambers and a short overhang area where the tool is not clamped give improved runout accuracy.
EASY CLAMPING WITH 1 WRENCH The cutting tool can be clamped or unclamped easily and securely with just 1 wrench. MAX 4,000 RPM Centering & Chamfering Shoulder Milling Helical Milling Ramping Shoulder Milling Helical Milling Ramping
MAX 2,000 RPM Plunge Milling
Plunge Milling
Plunge Milling
Helical Milling
Ramping
All Supported LED All
All Supported LED All
All Supported LED All
LIVE
LIVE
LIVE
Battery Alarm Buzzer
Battery Alarm Buzzer
Battery Alarm Buzzer
Conductivity
Conductivity
Conductivity
ALLOWABLE SHANK TOLERANCE OF CUTTING TOOLS (H6)
REFERENCE INFORMATION “h6” INCH SERIES
REFERENCE INFORMATION “h6” METRIC SERIES
Cutting Tool Shank Ø
Allowable Tolerance +0, -.00035 +0, -.00043 +0, -.0005
Cutting Tool Shank Ø
Allowable Tolerance (µm)
1/8, 1/4, 3/8
3, 4, 6, 8, 10mm 12, 14, 16, 18mm
+0, -8µm +0, -11µm +0, -13µsm
1/2, 5/8
3/4, 1, 1 1/4
20, 25, 32mm
26
Powered by FlippingBook