ANGLE HEADS
Catalog Number
Max RPM
Weight (lbs.)
Ød
ØE
G
K
L
L 1
L 2
M P
Q ØF
Collet
BBT50-AG90/NBS10-315LS BBT50-AG90/NBS10-345LS BBT50-AG90/NBS10-375LS BBT50-AG90/NBS10-415LS BBT50-AG90/NBS10-445LS BBT50-AG90/NBS10-475LS BBT50-AG90/NBS10-515LS BBT50-AG90/NBS10-545LS BBT50-AG90/NBS10-575LS BBT50-AG90/NBS13-315LS BBT50-AG90/NBS13-345LS BBT50-AG90/NBS13-375LS BBT50-AG90/NBS13-415LS BBT50-AG90/NBS13-445LS BBT50-AG90/NBS13-475LS BBT50-AG90/NBS13-515LS BBT50-AG90/NBS13-545LS BBT50-AG90/NBS13-575LS BBT50-AG90/NBS20-330LS BBT50-AG90/NBS20-430LS BBT50-AG90/NBS20-530LS
12.40 13.58 14.76 16.34 17.52 18.70 20.28 21.46 22.64 12.40 13.58 14.76 16.34 17.52 18.70 20.28 21.46 22.64
2.17 7.17 3.35 8.35 4.53 9.53 2.17 11.10 3.35 12.28 4.53 13.46 2.17 15.04 3.35 16.22 4.53 17.40 2.17 7.17 3.35 8.35 6.10 9.53 2.17 11.10 3.35 12.28 6.10 13.46 2.17 15.04 3.35 16.22 6.10 17.40
42.5 43.4 44.1 52.2 53.1 53.8 61.9 62.8 63.5 42.8 43.7 44.3 52.5 53.4 54.0 62.2 63.1 63.7 45.2 54.9 64.6
10.24
.059-.394
14.17
1.181 1.181 .984
1.77 1.69 3.583 NBC10- o
6,000
18.11
10.24
.098-.512
14.17
1.378 1.220 1.102
2.05 1.77 3.976 NBC13- o
6,000
18.11
12.99 10.24 2.76 7.76 16.93 14.17 2.76 11.69 20.87 18.11 2.76 15.63
.098-.787
1.811 1.378 1.378
2.56 2.44 5.197 NBC20- o
3,000
• Nut and wrench are included, collet must be ordered separately • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • When supplied through the stop block, coolant can be ejected from the housing • Automatic tool change may not be available depending on machine tool models • NEW BABY END MILL COLLETS cannot be used
A Stop Block is required. The rotation of the cutting tool is in reverse direction of the machine spindle (Speed Ratio 1:1). ! CAUTION
ACCESSORIES
COLLET PG. 360
WRENCH PG. 389
STOP BLOCK PG. 407
157
Powered by FlippingBook