MILLING CHUCKS
MEGA DOUBLE POWER CHUCK CLAMPING RANGE: ø.625"-1.500" High Rigidity Type for Heavy Duty End Milling
HIGHER RIGIDITY
COOLANT
MAX 30,000 RPM
THROUGH
H
E
øD 2
COOLANT
BCV No.
L 1
L 2
L
R
S P I N D L E S Y S T E M DUA L CON T AC T
Catalog Number
Max RPM
Weight (lbs.)
ød
øD øD 1
øD 2
L
L 1
L 2
H Min Clamping Length E Wrench
BCV40H-MEGA.625DS-3.5A .625
1.654 2.071 2.39 1.969 2.193 2.39
3.59 3.59
1.06 1.40 1.61 1.42
1.42 1.85
2.87 3.44
2.25 2.29 2.33 2.64
MGR42L 30,000 MGR50L 30,000 MGR62L 27,000 MGR70L 26,000
3.6 4.0 4.6 5.1 9.9
-MEGA.750DS-3.5A .750 -MEGA1.000DS-3.5A 1.000 -MEGA1.250DS-4A 1.250
2.441 2.469 2.756 2.783
— 3.59 — 4.09
— 3.42 — 3.63
BCV50H-MEGA.750DS-4
4.09 6.09 4.09 6.09 4.09 6.09
20,000
2.99 3.09 3.32 3.32 3.57 3.57
.750
1.10
1.51
3.44
2.29
MGR60L
2.362 2.717
-6
17,000 13.0 20,000 10.6 17,000 14.3 20,000 11.3 15,000 15.9
-MEGA1.000DS-4
1.000
2.756 3.031
1.34
1.87
3.63
2.64
MGR70L
-6
-MEGA1.250DS-4
1.250
1.65
2.23
4.22
2.88
MGR80L
3.150 3.386
-6
-MEGA1.500DS-4.5
1.500
3.898 3.925
— 4.58
1.65
— 4.29
2.88
MGR99L 15,000 14.6
• Wrench must be ordered separately • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • “H” indicates the adjustment length with an adjusting screw • “H” dimension is the Max tool shank length that can be inserted into the holder • MEGA16DS requires the hex socket head screw (M8) for axial adjustment, however, please contact us if using for center through applications • DS types have jet-through coolant supply, thus tools with holes cannot be used
ACCESSORIES
PERFECT SEAL/ JET COLLET PG. 361
COLLET PG. 364
MEGA WRENCH PG. 368
SCREW PG. 390
H type conforms to ASME B5.50-2015 standard for safe zone. Interference with tool changer may occur on machines made to an older standard. Consult engineering for specific information about the intended machine. ! CAUTION
64
Powered by FlippingBook