COLLET CHUCKS
MEGA E CHUCK CLAMPING RANGE: ø.125"-.500" (ø3-12mm) Exclusively for High Speed Finish End Milling
MAX 35,000 RPM
COOLANT
THROUGH
L
L 1
H
BCV No.
R
S P I N D L E S Y S T E M DUA L CON T AC T
Catalog Number
Weight (lbs.)
ød
øD
øD 1
L
L 1
H
Collet
Nut
Wrench Max RPM
BCV40-MEGA6E-3
3.00 4.00 5.00 6.00 3.00 4.00 5.00 6.00 3.00 4.00 5.00 6.00 8.00 3.00 4.00 5.00 6.00 8.00 4.00 5.00 6.00 8.00
1.50 2.42 3.54 4.54 1.50 2.54 3.58 4.58 1.54 2.58 3.58 4.58 6.62 1.62 2.62 3.62 4.62 6.62 2.42 3.42 4.42 6.50
35,000 29,000 29,000 20,000 30,000 29,000 29,000 20,000 30,000 29,000 29,000 22,000 16,000 30,000 29,000 29,000 22,000 16,000 18,000 18,000 16,000 12,000
2.5 3.0 3.4 3.8 2.8 3.2 3.6 4.3 2.9 3.4 3.9 4.5 5.2 3.2 3.8 4.3 4.9 6.1 8.5 9.3
1.09 1.25 1.45 1.50 1.28 1.46 1.55 1.69 1.48 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.90 2.07 2.25 2.42
-4 -5 -6
.125-.250 (3-6mm)
1.45-1.77 MEC6-
MEN6 MGR25
.984
-MEGA8E-3
-4 -5 -6
.125-.250 (3-8mm)
1.65-2.00 MEC8-
MEN8 MGR30
1.181
-MEGA10E-3
-4 -5 -6 -8
.125-.375 (3-10mm)
1.378
1.89-2.28 MEC10-
MEN10 MGR35
-MEGA13E-3
-4 -5 -6 -8
.125-.500 (3-12mm)
1.96-2.36 MEC13-
MEN13 MGR42
1.654
BCV50-MEGA13E-4
-5 -6 -8
.125-.500 (3-12mm)
1.96-2.36 MEC13-
MEN13 MGR42
1.654
10.6 12.8
• MEGA E NUT is included, collet, wrench and adjusting screw must be ordered separately • Weight includes nut but not collet • Center through coolant supply is available • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • “H” indicates the adjustment length with an adjusting screw
ACCESSORIES
COLLET PG. 358
MEGA NUT PG. 359
PERFECT SEAL PG. 359
MEGA WRENCH PG. 368
SCREW PG. 389
62
Powered by FlippingBook