MEASURING INSTRUMENTS
BASE MASTER MINI—ULTRA-THIN TYPE •Cutting edge position measuring device with a reference height of 10mm. •Ultra-compact design considering tool interference prevention. •High brightness LED (green) lights to instantly detect the reference point.
For All Workpieces and Machine Tools
LED Flashes To Indicate That Battery Life Is Low
All Supported All
LED
Strap Hole
LED
Height Accuracy
+0.005mm 0
Repeatability
±1μm
Min. Tool Diameter Measuring Pressure
ø0.1mm
1.0N 1mm
Stroke
ø.197 Measuring Surface (Ceramic)
Battery
Touch Signal
LED Illuminates (Green)
Battery Cap
Battery
CR1620x1
Catalog Number BMM-10
Battery Life
10 Continuous Hours
Weight
.02 lbs.
2.362
BASE MASTER MINI Electronic detection of the cutting edge position. Repeatability ±1μm (.00004").
For All Workpieces and Machine Tools
LED Flashes To Indicate That Battery Life Is Low
All Supported All
Loupe (5x Magnification)
ø.669
Protective Cover
ø.197 (Measuring Surface)
LED
Height Accuracy
+0.005mm 0
Repeatability
±1μm
LED (Blue)
Min. Tool Diameter Measuring Pressure
ø.1mm
Battery (SR44 x2) Magnet
1.8N 2mm
Stroke
Catalog Number BMM-20
Touch Signal
LED Illuminates (Blue)
Battery
SR44 x 2
With Protective Cover Attached
ø.787
Battery Life
10 Continuous Hours
• Wrench for battery cap is included • Type without magnets is also available, If required, add /N at the end of the model number when ordering (Example: BM-50/N)
Weight
.12 lbs.
TOOL MASTER Non-Conductive Workpieces and Tools can Also be Measured! Uses a large, easily read dial (with buzzer and LED), one-touch height adjustment mechanism and a firmly fixed powerful magnet.
For All Workpieces and Machine Tools
LED Flashes To Indicate That Battery Life Is Low
Notifies Via Led
All Supported All
LED
Buzzer
Height Accuracy Min. Tool Diameter Measuring Pressure
100 +.02/0mm
ø39
ø1mm
3N (at 100mm)
LED (red) LED (green)
Stroke
10mm
Stroke Range
97-102mm
LED
Lit (Green)
Around 100.5mm
Buzzer
"Beep"
Notification Signal
Buzzer
LED Flashing (Green/Red) Buzzer "Beep Beep Beep"
Around 99.5mm
Battery
Magnet
Battery Weight
SR44 x 2
2.2 lbs.
Catalog Number TM-100N
2.157
ø2.480
Standard Accessory
Setting Gauge x 1P
• Dial gauge accuracy conforms to JIS B7503:2011. • Type without magnets is also available, If required, add /N at the end of the model number when ordering (Example: TM-100/N)
Min. Scale
.01mm ±15μm
Indicator Error Repeatability Return Error
Dial Gauge Accuracy
5μm 5μm
604
Powered by FlippingBook