FACE MILLS
SPEED FINISHER INSERTS
.295
.295
Fig. 1
Fig. 2
INSERT CLASSIFICATIONS
Catalog Number
Cutting Edge Length (ap)
Workpiece
Fig.
Material
DA2200
CBN
PL0705-DA2200
Aluminum & Nonferrous
1 Diamond
.197 .020
High density sintered material made of ultra-micro diamond particles. Superior wear resistance and hardness comparable to carbide alloy.
PL0705-CBN
Cast Iron
2
CBN
Newly designed CBN sintered body with high content rate of CBN improves toughness and thermal conductivity.
• All dimensions shown in millimeters • Each insert is packed in a case (order example: PL0705 DA2200 5 pcs.) • Regrinding of the insert is possible only once (grinding amount .008") • Early regrinding is recommended, since regrinding becomes unavailable after excessive wear or once chipping occurs
SPEED FINISHER CUTTING CONDITIONS
Workpiece Material
Insert Material
Cutting Speed (SFM)
Feed Rate (IPT)
Coolant
Si Content 13% Si Content 13% <
6,600-13,000 1,300-2,600 1,600-8,200 2,600-6,600
Aluminum Alloy
DA2200
.002-.008
Wet
Copper Alloy Gray Cast Iron
DA2200
.002-.008 .004-.012
Wet Dry
CBN
• The table is a reference to determine cutting conditions and it should be adjusted according to cutting width and conditions of the machine tool and workpiece
SPEED FINISHER SPARE PARTS
Lifting Screw Set (1 Lifting Screw & 1 Lifting Nut)
Insert Clamping Screw Set (10 Screws & 1 Wrench)
Wrench
Catalog Number
Catalog Number
Catalog Number
LSN35
S2506DS
DA-T8
• Insert clamping screws and wrenches are consumables, therefore regular replacement and extra stock are recommended
569
Powered by FlippingBook