INDEXABLE END MILLS
FULLCUT MILL—TYPE FCM (HSK)
L
L 1
ap Effective Cutter Length A
Coolant Pipe (Optional)
Catalog Number
Effective Cutting Edge Length ap
Number of Inserts
Insert Model
Weight (lbs.)
øD
øD 1
L
L 1
A
HSK-E25-FCM16092-45
.748 1.02 1.34
1.77 2.17 2.56
1.38 1.38 1.77
.906 .906
.4 .4
-E32-FCM16091-55 -E40-FCM16091-65
16mm (.630)
.354
2
ARG1609
1.102
1.0 ACCESSORIES
• Wrench included, Coolant Pipe & Inserts must be ordered separately
As the HSK-E type interface does not have drive key grooves, there is a risk that it may slip in the machine spindle and damage it if cutting load exceeds clamping force of the machine tool. Starting from the lowest possible conditions, increase them gradually while observing the cutting status, and find the optimum with sufficient safety margin. ! CAUTION
INSERTS PG. 558
FULLCUT MILL—TYPE FCM, INCH STYLE
L
L 2
L 1
ap
Polygon C6
Catalog Number
No. of Inserts
Insert Model
øD
øD 1
ap
L
L 1
L 2
C6-FCM.750-4
ARG2009 ARG2509 ARG3211 ARG4011 ARG4011
.750
4.000 4.000 4.000 4.000 4.000
1.400 1.800 2.400 2.500 2.500
3.100 3.100 3.100 3.100 3.100
3 3 3 4 5
.354
-FCM1.000-4 -FCM1.250-4 -FCM1.500-4 -FCM2.000-4
1.000 1.250 1.500 2.000
2.285
.433
2.362
ACCESSORIES
• ap = length of effective cutting edge • Coolant Pipe & Inserts must be ordered separately • Metric sizes are available upon request • C5 is available upon request (metric only)
INSERTS PG. 558
555
Powered by FlippingBook