BIG KAISER High Performance Tooling Solutions 2018-2019

TURNING TOOLS 45º TILT STYLE, TYPE S OVERVIEW

The Very First Modular Tooling System For Turning Applications on Mill-Turn Machines A modular tooling system offers better efficiency, material selection, heat treatment and optimal tool lengths. The serious damage on tool holders caused by broken inserts can now be easily and economically replaced. Boring bar & square tool holders options also available.

45º TILT STYLE TYPE S

45º

R

S P I N D L E S Y S T E M DUA L CON T AC T

Minimized Cutting Forces Tilting the “B” axis 45º helps to minimize the cutting forces transmitted to the machine spindle. This force reduction increases the life of the machine spindle & insert life.

With the “B” axis at 45º, accessibility problems with the chuck or tailstock are overcome to minimize tool length.

45º

COOLANT

SHORT

THROUGH

Basic Holder

Secure and Rigid Type S Cartridge Clamping System Using highly sophisticated and modern machine tools, Type S Cartridges are made to very close tolerances required for turning accuracy and repeatability. The cartridge is located in the basic holder by means of a precision ground pilot and secured by 2 opposing radial screws with a 15º taper. With a slight offset to locating sockets, high face-to-face clamping force of the two components is generated. To maintain precise locations and orientation, an additional locating pin is included for positive transfer of cutting torque.

Cartridge

AVAILABLE IN BCV, BBT, HSK & BIG CAPTO

Coolant Nozzle

17 Cartridges for 45º Tilt Style Type S

Very Precise Locating Pilot

Locking Screw 2x

Orientation Pin

Face-To-Face Clamping

38

Powered by