HYDRAULIC CHUCKS
SUPER SLIM TYPE CLAMPING RANGE: ø3mm-12mm For Drills, Reamers, Ball Mills, End Mills, Diamond Reamers & Grinding Tools
COOLANT
THROUGH
Min. Clamping Length E Max. Insertion Depth H
L 1
L
Catalog Number
Max RPM
Weight (lbs.)
ød
øD
øD1
øD2
L
L1
H
E
HSK-F63-HDC3S-75
.63 .75 .98
30,000 30,000 30,000 30,000 30,000 30,000
2.2 2.2 2.2 2.2 2.2 2.2
3mm 4mm 6mm 8mm
-HDC4S-75 -HDC6S-75 -HDC8S-75 -HDC10S-75 -HDC12S-75
.551
.787
1.02
1.890
2.95
2.56
.669 .748 .827
.906
1.22 1.30 1.42
1.06
10mm 12mm
1.024 1.102
1.10
ā¢ Adjusting screws cannot be used ā¢ In case our HSK tool holders are used in a machine which does not recommend the center through coolant, the plug screw should be mounted to our tools
Use only cutting tools that have a shank tolerance of h6. Do not use with cutting tools made with a flat on the shank (ie: Weldon type shank). Roughing end mills are not recommended for use with HYDRAULIC CHUCKS. Do not tighten the clamping screw without first inserting a cutting tool into the tool holder. Always insert the cutting tool into the hydraulic tool holder beyond min. clamping length āEā. ! CAUTION
225
Powered by FlippingBook