BIG KAISER High Performance Tooling Solutions 2018-2019

ANGLE HEADS

AGU30 TYPE CLAMPING RANGE: ø.098"-.787" For Angular Operations

L

L 1

L 2

G G

Max F 2

Coolant Pipe (Optional)

ø3.819

UP TO 6,000 SFM MAX RP

M

R.709

.197 Pin Compression Fixed Length A

Fig. 1

L

L 1

L 2 Max F 2

G G

Coolant Pipe (Optional)

Angle Adjustment by Aligning Divisions Spindle angle is easily adjustable from 0º to 30º using the scale indication on the body.

ø4.921

M

MAX 4,000 RPM

R.827

.236 Collar Compression

.118 Pin Compression Fixed Length A

Fig. 2

Catalog Number

Max RPM

Weight (lbs.)

Fig.

ød

øE G L

L 1

L 2

M P Q F 1

F 2

Collet

.098-.512 .098-.787

HSK-A63-AGU30/NBS13-255 HSK-A100-AGU30/NBS20-305

1.378 1.142 10.04 5.91 4.13 5.79 1.34 1.18 2.07 .55 NBC13- † 1.811 1.437 12.01 6.89 5.12 6.38 1.77 1.54 2.56 .67 NBC20- †

6,000 15.0 4,000 33.7

1 2

• Nut and wrench are included, coolant pipe and collet must be ordered separately • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines must be order separately • Automatic tool change may not be available depending on machine tool models • When supplied through the stop block, coolant can be ejected from the housing

A Stop Block is required. The rotation of the cutting tool is in reverse direction of the machine spindle (Speed Ratio 1:1). ! CAUTION

ACCESSORIES

COLLET PG. 338

WRENCH PG. 350

STOP BLOCK PG. 385

STOP BLOCK PG. 385

SETTING DISC (INCLUDED) For the precise adjustment of spindle angle or direction.

Clamp the Setting Disc Into the Angled Spindle

Check the Cutter Alignment and the Setting Angle

209

Powered by