ANGLE HEADS
Catalog Number
Max RPM
Weight (lbs.)
ød
øE
G
K
L
L 1
L 2
M P
Q øF
Collet
HSK-A100-AG90/NBS10-325LS
12.80 13.98 15.16 16.73 17.91 19.09 20.67 21.85 23.03 12.80 13.98 15.16 16.73 17.91 19.09 20.67 21.85 23.03
2.17 7.17 3.35 8.35 4.53 9.53 2.17 11.10 3.35 12.28 4.53 13.46 2.17 15.04 3.35 16.22 4.53 17.40 2.17 7.17 3.35 8.35 6.10 9.53 2.17 11.10 3.35 12.28 6.10 13.46 2.17 15.04 3.35 16.22 6.10 17.40
40.8 41.7 42.3 50.5 51.4 52.0 60.2 61.1 61.7 41.0 41.9 42.5 50.7 51.6 52.2 60.4 61.3 61.9 43.4 53.1 62.8
-355LS -385LS -425LS -455LS -485LS -525LS -555LS -585LS
.059-.394
1.181 1.181 .984
10.63
1.77 1.69 3.583
.059-.394
1.77 1.69 3.583
1.181 1.181 .984
14.57
6,000
NBC10-
.059-.394
1.181 1.181 .984
18.50
1.77 1.69 3.583
-AG90/NBS13-325LS
-355LS -385LS -425LS -455LS -485LS -525LS -555LS -585LS
.098-.512
2.05 1.77 3.976
1.378 1.220 1.102
10.63
.098-.512
1.378 1.220 1.102
14.57
6,000
2.05 1.77 3.976
NBC13-
.098-.512
1.378 1.220 1.102
18.50
2.05 1.77 3.976
-AG90/NBS20-340LS .098-.787
1.811 1.378 1.378 13.39 10.30 2.76 7.76 2.56 2.44 5.197 1.811 1.378 1.378 17.32 14.57 2.76 11.69 2.56 2.44 5.197 1.811 1.378 1.378 21.26 18.50 2.76 15.63 2.56 2.44 5.197
3,000
-440LS .098-.787 -540LS .098-.787
NBC20-
• Nut and wrench are included, coolant pipe and collet must be ordered separately • Output spindles of twin head do not rotate in forward direction simultaneously • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable
• A stop block is required when mounting on machines must be order separately • When supplied through the stop block, coolant can be ejected from the housing • Automatic tool change may not be available depending on machine tool models • NEW BABY ENDMILL COLLETS cannot be used
A Stop Block is required. The rotation of the cutting tool is in reverse direction of the machine spindle (Speed Ratio 1:1). ! CAUTION
ACCESSORIES
COLLET PG. 338
WRENCH PG. 350
STOP BLOCK PG. 385
203
Powered by FlippingBook