ANGLE HEADS
AG90 NBS TYPE CLAMPING RANGE: ø.010"-.787"
UP TO 6,000 SFM MAX RP
K
L
L 1
L 2
G G
øE ød
Coolant Pipe (Optional)
ø3.819
R.827
M
.236 Collar Compression
Fixed Length A .118 Pin Compression
Catalog Number
Max RPM
Weight (lbs.)
ød
øE
G
K
L
L 1
L 2
M P
Q øF
Collet
HSK-A100-AG90/NBS6-225
8.86
2.17 3.23 3.35 4.41 4.53 5.59 5.71 6.77 2.17 3.23 3.35 4.41 4.53 5.59 2.17 3.23 3.35 4.41 4.53 5.59
26.0 26.5 27.3 26.9 27.8 28.4 27.1 28.0 28.6 29.5
-255 -285 -315
10.04 11.22 12.40
.010-.236
.787 .827 .669
6.69
1.30 1.14 2.638 NBC6-
6,000
-AG90/NBS10-225
8.86
.059-.394
-255 -285
1.181 1.181 .984
6.69
10.04 11.22
1.77 1.69 3.583 NBC10-
6,000
-AG90/NBS13-225
8.86
.098-.512
-255 -285
1.378 1.220 1.102
6.69
10.04 11.22
2.05 1.77 3.976 NBC13-
6,000
-AG90/NBS20-240 .098-.787
1.811 1.378 1.378 9.45 6.69 2.76 3.82 2.44 2.44 5.197 NBC20-
3,000 30.4
• Nut and wrench are included, coolant pipe and collet must be ordered separately • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable
• A stop block is required when mounting on machines must be order separately • When supplied through the stop block, coolant can be ejected from the housing • Automatic tool change may not be available depending on machine tool models • NEW BABY ENDMILL COLLETS cannot be used
A Stop Block is required. The rotation of the cutting tool is in reverse direction of the machine spindle (Speed Ratio 1:1). ! CAUTION
ACCESSORIES
COLLET PG. 338
WRENCH PG. 350
STOP BLOCK PG. 385
201
Powered by FlippingBook