BIG KAISER Chip Blower

CHIP BLOWER Automatic cleaning tool for cutting chips and coolant

CLEANERS

CHIP BLOWER Wind pressure removes cutting chips and coolant •Reduce environmental impact • Improved machine utilization rate • Increased productivity •Can be used with vertical and horizontal machining centers

COOLANT

THROUGH

High-pressure washing with center-through coolant

Blows away cutting chips with powerful wind pressure

ST20-CBL260 — 7,000RPM

2

CLEANERS

ø160 TYPE

Catalog Number

ST20-CBL160

500min

1,000min -1

2,000min -1

-1

Startup Spindle Speed*

(.5 sec)

(.5 sec)

(.5 sec)

Min. 6,000 Max. 9,000min -1

Recommended Spindle Speed

Rotation Direction

Forward

Flange: ø2.60

Distance to the Workpiece Surface to be Cleaned (with wing opened to maximum)

3.94-5.91"

Recommended Movement Feed

118-394 ipm

Weight (lbs.)

.4

*The wing may open during ATC when it is used with an ultra-high speed ATC machining center

ø260 & ø330 TYPE

Catalog Number

ST20-CBL260

ST20-CBL330

500min

1,000min -1

2,000min -1

-1

Startup Spindle Speed*

(.5 sec)

(.5 sec)

(.5 sec)

Min. 4,000 Max. 7,000min -1

Min. 3,000 Max. 6,000min -1

Recommended Spindle Speed

Rotation Direction

Forward

Flange: ø2.60

Distance to the Workpiece Surface to be Cleaned (with wing opened to maximum)

3.94-5.91"

Recommended Movement Feed

118-394 ipm

Weight (lbs.)

.4

.4

*The wing may open during ATC when it is used with an ultra-high speed ATC machining center

Repair Kit

Catalog Number

RK-CBL160 RK-CBL260 RK-CBL330

• Springs can be purchased separately; 10 pcs. in package (CBL-SP-10P)

! CAUTION

• Startup Spindle Speed — In recent high-speed machining centers, the machine spindle rotation rise has become faster. A sudden command for spindle speed may create a strong impact on the wing as it opens; therefore, be sure to rotate it at the startup speed in the table above before raising it to the designated spindle speed. • The spindle speed and the distance to the workpiece surface in the above table differ depending on the weight of the cutting chips. Be sure to confirm before use.

• The wing may open during ATC when it is used with an ultra-high speed ATC machining center. • When supplying coolant with center through, be sure to stop the spindle rotation first. • This product must be used only with a machine with a full cover. • Never modify this product in any way. • The dedicated spring must be replaced after about 20,000 use cycles. S end back the unit for replacement through your supplier.

• Although the wing is made of high-strength carbon fiber reinforced resin, it may be worn out or damaged due to the collision of cutting chips or impact when opening/closing. I f wear and damage progress, the wing may snap and fly out during use. Be sure to periodically check the damage of the wing visually and replace it as needed. Send back the unit for replacement through your supplier. Individual wings are not available for sale. • The cylindrical shank outer diameter of the chip blower is ø20. Use a BIG NEW BABY CHUCK for the holder. Grasping with a holder with low inner diameter collapsibility is dangerous and must be avoided.

3

BIG KAISER Precision Tooling Inc. A Member of the BIG DAISHOWA Group 2600 Huntington Blvd | Hoffman Estates, IL 60192 | P: (224) 770-2999 | F: (224) 770-2997 | bigkaiser@us.bigkaiser.com | www.bigkaiser.com

10/2019 © Copyright 2019 BIG KAISER

Page 1 Page 2 Page 3 Page 4

Powered by